Ultrasonic Testing Equipment, Flaw Detectors and Thickness Gauges : Modsonic India About Modsonic : Ultrasonic Testing Equipment, Flaw Detectors and Thickness Gauges : Modsonic India
3-4 November 2011, HOLIDAY INN ATRIUM, SINGAPORE
8-10 December 2011, Chennai, India
1-4 April 2012, Gulf International Convention Centre, Gulf Hotel, Kingdom of Bahrain.
16-20 April 2012, International Convention Centre, Durban, South Africa
 

Products : Conventional

Ultrasonic Thickness Gauges

Edison - Series

Best Value for Money

 
1. All Product List
2. Conventional Product List
     
 

Salient Features

  • Memory of 2000 Readings*
  • Computer Connectivity*
  • 0.01 mm (10 microns) Resolution **
  • One Step Calibration
  • Operates on Two AA Batteries
  • Sealed Touch Key Pad
  • Built-in Calibration Block
  • EL back-light for indoor/dark areas (optional)

* Available in EDISON-1M
** Available in EDISON-1P

Technical Specification - EDISON-1 AND EDISON-1M
Applicable Materials All homogeneous materials which allow transmission of Ultrasonic energy through it like most of metals, hard plastics, glass, ceramics etc.
Measuring Range 1mm to 300mm (Specified range depends on test material, transducer,
surface and temperature.)
Probe Dual crystal (Transmitter Receiver) type.
Key Pad Sealed tactile type.
Velocity 1000 m/s to 9999 m/s.
Display LCD type. It displays Thickness, Velocity, Battery check, Coupling check, and stored readings with IDs.
Resolution 0.1 mm(0.01mm in EDISON-1P)
Accuracy
± 0.1mm (up to 60mm)
± 0.5% (above 60 mm) 		{with standard
probe DT 201}
V- path Correction Built-in for better accuracy.
Calibration One step calibration.(for steel).
Battery 2 Penlite Dry Cells (AA) or NiCd.
Operating time 18 to 20 hours.(with alkaline batteries).
Low Battery Indication by Blinking of LCD.
Auto Power off 3 minutes after switching on/last reading.
Size mm 125(H) x 65(W) x 30(D).
Weight 225 Grams (With batteries).
EDISON-1M
Memory 2000 readings with 4 digits ID.
RS-232 Port Available for connectivity to PC / Printer.
Unit Imperial (Inches) or Metric (mm) selection available

 

PROBES

PROBES
Frequency
(MHz.) &
Crystal dia
(mm)
TEST RANGE (IN STEEL)
ACCURACY
ALLOWABLE
SURFACE
TEMPERATURE
TYPICAL
APPLICATION
FLAT
SURFACE
(mm)
CYLINDRICAL
SURFACE
(mm)
DT 201 5/10 2 - 200 2-200mm with OD 45mm & more ± 0.1 mm upto 60 mm, ± 0.5% above 60mm 0 to 70 Deg. C General purpose For Flat surface and Bigger dia.
DT 212 10/5 1 - 25 2-25 mm with OD 25mm and more ± 0.1 mm 0 to 70 Deg. C For lower dia. Tubes and thin objects.
DT 203 2/20 5 - 300 5-300 with OD 100 mm and more ± 0.3 mm up to 50 mm, ± 1% above 50 mm 0 to 70 Deg. C For castings and Other coarse-grain material.
DT 201 (H) 5/10 4 - 50 5-10 with OD 100 mm And more ± 0.1 mm 0 to 150 Deg. C For elevated surface temperature

 
 
Home | About Us | Products | Network | NDT | Representations | Achievements | Downloads | History | Events | Photo Gallery | Enquiry | Site Map | Contact Us

Modsonic Instruments Manufacturing Company Pvt. Ltd.
Plot 33, Phase III, GIDC Industrial Estate, Naroda, Ahmedabad - 382330. INDIA.
Phone : +91 (79) 22811217  +91 (79) 22811217, 22813131, 22841294, Fax : +91 (79) 22820012
Email : modsonic@modsonic.com , Website : www.modsonic.com


This website is a property of Modsonic                                                                                                                    Powered & Designed by : Real Time Solutions