|
|
|
 |
|
| |
 |
|
|
Products : Automated
DATA PROCESSING : PC_PROCESS FOR
ERW-SAW PIPES |
 |
1. All Product List
2. Automated Product List |
| |
|
|
| The Edge test can take place just before the welding during the pipe manufacturing process.
The control is done under the coil strip on both sides. The system is used to check lamination. |
Mechanical System and Remote Control
|
Meets specifications :
- API 5L 2000
- ISO 3183-3
- ARAMCO
Pipe manufacturing range :
Any coil width range
Thickness range : 5mm to 25mm
|
The system includes : |
- 2 UT probes (single element)
- Multi-channel UT system
- Fully programmable settings
- Marking on coil for
- Lamination detection
- Loss of coupling
- Mechanical head and probe holder
- Data capture :
- First printout : produce scanning
information for each probe
- Second printout : summary and
full report, traceability for
a complete coil for each defect
or loss of coupling
- Storing on CD-Rom
- Network link
- Single crystal probe : near surface resolution is better than 25% of the thickness.
- 25mm minimum of the edge coil tested
- Edge lamination testing detects a 6.3mm flat bottom hole at ½ plate thickness
- Coupling stability control on each shot
|
 |
 |
|
Environment:
The UT system is designed to be placed very close to possible noise sources (Plasma cutters, welding machines, frequency inverters…).
The possible electromagnetic interference peaks are lowered and not detected. Besides, the system can operate in difficult conditions (room temperature up to 50°C and humidity up to 98%) |
|
|
|
|
|
|
| | | | | | | | | | | | | |
|
Modsonic Instruments Manufacturing Company Pvt. Ltd.
Plot 33, Phase III, GIDC Industrial Estate, Naroda, Ahmedabad - 382330. INDIA.
Phone : +91 (79) 22811217 +91 (79) 22811217, 22813131, 22841294, Fax : +91 (79) 22820012
Email : , Website :
This website is a property of Modsonic Powered & Designed by :
|
|
|
|
