|
|
|
 |
|
| |
 |
|
|
Products : Advanced
TD Pocket Scan |
|
1. All Product List
2. Advanced Product List |
| |
|
|
 |
| |
| Features |
Application |
| Exceptional Price/Performance |
Pressure Vessels Welds |
| Portable yet Highly Capable |
Pipeline Welds |
| High Speed Real-time Data Collection |
Structural Welds |
| Fast Inspection Speeds |
Hydrogen Damage Surveys |
| Extensive Off-line Analysis Tools |
Corrosion Surveys |
| Easy to use Menu’s |
Forgings & Castings |
| Built-in Reporting |
Aircraft Components |
| |
Complex Geometries |
| Techniques |
Software Options |
| ToFD |
Pulse Echo |
| Pulse Echo |
ToFD |
| Corrosion Mapping |
Strip-Scan |
| Weld Zone Discrimination |
Long Range (CHIME®) |
| |
TD Super-View |
TD Pocket Scan Technical Specification
Hardware
| General |
| Number Of Probe Inputs |
4 / 8 |
| Number Of Software Channels |
128 / 512 |
| Rectification |
| Type |
Unrectified, Full Wave, +1/2 Wave, -1/2 Wave |
| Linearity |
Better than 1% full Scale |
| Digitisation |
| Main Sampling Frequency 100MHz |
8/14bits(option) @ |
| System Bandwidth(-3dB) |
0.25MHz to 30MHz |
| Pulse Repetition Frequency |
Up to 15KHz |
| A-Scan Digitisation |
| A/D Converter |
8/14 Bit (option), 100MHz single shot A/D |
| Number Of A-Scan Points/Channel |
8192/32.768 (option) points per channel |
| Sampling delay |
0 - 10ms, in 25ns steps @ 100MHz sampling rate |
Pulser |
| Number Of Pulsers |
4 / 8 (expandable to 512 via external expansion port) |
| Single/Twin Crystals |
Yes |
| Output Impedance |
6 Ohms |
| HT Pulse Shape |
Negative square wave |
| HT Pulse Voltage steps of 5V |
0 - 200V user definable |
| HT Pulse Width Range |
20ns to 500ns in 2ns steps with < 5ns rise/fall time |
Signal Averaging |
| Number Of Channels |
All |
| Averaging Performance |
100 million points per second |
| Averaging Rates |
Real-time averaging 1- 256, user definable |
Receiver |
| Number Of Receivers |
4 / 8 (expandable to 512 via external interface port) |
| Signal Bandwidth (-3dB) |
0.25MHz - 30MHz |
| Gain Range |
0dB to 100dB’s in 0.1dB steps |
| Gain Linearity |
0.25dB (typical) |
| Input Noise Level |
1.4nV/(Hz) 1/2 (typical) across full system bandwidth |
| Input Impedance |
50 Ohms |
Peak Processing |
| Peak Storage Modes |
All Peaks, First Peak, Largest Peak/s, Loss Of Signal |
| Thickness Measurement Modes |
Thinnest/Thickest/Between Peaks |
| Threshold Setup |
5 to 100% in 1% steps per hardware Gate |
| Number Of Peaks Per Gate |
64 |
Time Corrected Gain (TCG) |
| Number Of Curves |
8 |
| Gain Range |
0 to 100dB in 0.1dB steps on each element |
| Rate Of Gain Change |
Up to 40dB/μs |
| DAC Time resolution |
Automatically controlled using gate Parameters |
| DAC Start reference |
Transmit Pulse or material i/f echo, user selectable |
Scanner Interface |
| Input Type |
Encoder, Potentiometer or Video Camera |
| Number Of Axis |
2, TTL compatible |
| Number Of Limit Inputs |
2, TTL compatible |
| Encoder Interface |
TTL compatible, 5V @ 250mA(max), 100KHz max |
| Potentiometer Interface |
0 to 2.5V, sampled at 100Hz |
| Video Camera Input |
1Vpp Composite Video (PAL, RS-170) |
Analogue Signal Filtering |
| High Pass Filters (-3dB) |
0.25, 0.5, 0.75, 1.0, 2.5, 5, 10, 15MHz |
| Low Pass Filters (-3dB) |
1, 2.5, 5.0, 7.5, 10, 15, 20, 30MHz |
| Post Rect. Smoothing Filters (-3dB) |
No filter, 1, 2, 3, 4, 5, 6, 7MHz, all filters selectable |
| Filter Roll-Off Performance |
60dB per decade |
| Filter Type |
6dB Transitional, minimal distortion |
PC & Operating System |
| Computer Type |
Notebook or Desktop |
| Operating System |
Windows® XP Pro® |
| Processor |
Pentium 600 (min) |
| Memory |
512MBytes (min), 1Gbyte recommended |
| Graphic Resolution |
800 X 600 - 1680X1280 |
| Hard Disk |
5 Gbyte(min) |
| Graphic Controllers |
All |
| Power Requirement |
| DC Input |
6V to 12.5V @ 5Watts (approx.) |
| AC Input |
90 to 260VAC @ 40 to 60Hz |
| Size, Weight & Environmental |
| Unit Dimensions |
4 Channel - 81mm x 107mm x 32mm
8 Channel - 107mm x 107mm x 32mm |
| Weight |
0.2Kg |
| Rating |
IP54, IP67 (Optional) |
| Temperature |
0°C to 40°C operating, -25°C to 85°C storage |
Software
| General Features |
Pulse Echo /Corrosion Mapping |
| Operator definable weld geometry overlays |
Realtime A,B,C and D-Scan images, with user defined display modes |
| Real-time A, B, C and D-Scan images, with user defined display modes |
Multiple peak data storage modes, including full/selective A-Scan storage |
| Multiple Time Corrected Gain curves |
Trigger reference modes including Interface Echo or Tx Pulse |
| Internal report generation including interactive print-preview & user-definable report fields |
Multiple TCG curves via user defined gain/time points correct for material attenuation |
| Full cursor analysis indicating peak depth, amplitude and x,y position |
Full suite of analysis, sizing & post processing utilities |
| Export Bitmap images to any Windows application |
Automated report generation including interactive print preview |
| Easy to use intuitive menu system |
Displayed as conventional A, B, C, D-Scan image showing depth and amplitude |
| |
User defined display option for each scan window |
| Full cursor analysis indicating peak depth, amplitude and x,y position |
| Supports single or dual x-y encoder and motorized scanners |
| ToFD |
StripScan |
| Clear user-friendly menus |
ASTM E1961/ API 1104 compliant Girth/Seam weld examination software |
| Very fast inspection rates up to 400mm /sec |
Fast, accurate inspection at up to 200mm/sec |
| Perform multi-channel TOFD and Pulse Echo inspections simultaneously |
Combined TOFD, Time/Amplitude view, Map view, Couplant check, Go/no-go |
| Full suite of image analysis tools for defect/crack sizing |
Integrated TOFD analysis at the click of a button |
| Realtime multi-channel averaging significantly improves signal quality |
Weld zone inspection data displayed as strips |
| Linearisation, Straightening, Synthetic Aperture Focussing Technique (SAFT) |
Automated defect information tabulation |
| File utilities include file join, split, reverse, save partial data output to text |
|
| Automatically create/export bitmap images to any Windows application |
|
|
|
|
|
| | | | | | | | | | | | | |
|
Modsonic Instruments Manufacturing Company Pvt. Ltd.
Plot 33, Phase III, GIDC Industrial Estate, Naroda, Ahmedabad - 382330. INDIA.
Phone : +91 (79) 22811217 +91 (79) 22811217, 22813131, 22841294, Fax : +91 (79) 22820012
Email : , Website :
This website is a property of Modsonic Powered & Designed by :
|
|
|
|
