Ultrasonic Thickness Gauges : Dtm 2 Series

Modsonic ultrasonic testing equipment india

Buyer's Guide -- Modsonic Instruments Mfg. Co. Pvt. Ltd. -- Ultrasonic Flaw Detectors, Ultrasonic Testing Equipment, Ultrasonic Thickness Gauges, Accessories & Attachments etc.

ULTRASONIC THICKNESS GAUGES >> DTM - 2 - SERIES

Dtm 2 Series - ultrasonic testing equipment, ultrasonic thickness gauges, ultrasonic flaw detectors, ultrasonic accessories, probes, probe cable, recorder attachments, msl series, galileo series, newton, edison series, dtm 2 series, reference block, adapters , probes attachments, dgs scale

	Most popular thickness gauges.			DTM - 2 : For indoor / dark environment.
	DTM - 2 "PLUS" : 0.01mm Resolution			DTM - 2 LCDM : General Purpose.
	DTM - 2 "STEEL" : Economy Model.			DTM - 2 "CASTING" : Special for casting / attenuative materials.

TECHNICAL SPECIFICATION

MODELS

PROBES

THICKNESS
RANGE*
( mm )

ACCURACY

RESOLUTION
( mm )

VELOCITY
RANGE
( met / sec )

DISPLAY

DTM - 2
LCDM

DT - 201
DT - 212
DT - 203
DT - 201 ( H )
( Interchangeable )

1 - 300

As per Probes Selected

0.1

1000 - 9990

4 Digit Large LCD

DTM - 2

DT - 201
DT - 212
DT - 203
DT - 201 ( H )
( Interchangeable )

1 - 300

As per Probes Selected

0.1

1000 - 9990

Bright Red LED ( for Indoor Use )

DTM - 2
"CASTING"

DT - 203
( Detachable )

5 - 300

ą 0.3mm upto 50mm; ą 1% above 50 mm

0.1

1000 - 9990

4 Digit Large LCD

DTM - 2
"PLUS"

DT - 212
( Detachable )

1 - 25

ą 0.05mm upto 10mm; ą 0.07mm above 10 mm

0.01

1000 - 9990

4 Digit Large LCD

DTM - 2
"STEEL"

DT - 201
( Fixed )

1.5 - 100

ą 0.1mm upto 60mm; ą 0.5% above 60 mm

0.1

Pre - Calibrated for "STEEL"

4 Digit Large LCD

Common to
all models

Auto Cut off	:	Approx 3 minutes after last reading or switching on
Power Supply	:	a. Five "AA" size batteries ( Dry or NICad ) b. Low Battery indication available c. Operating Time : Upto 10 Hours
Size ( mm )	:	65 X 150 X 33 ( W X H X D ).
Weight	:	Approx 350gms with Batteries.
Housing	:	ABS Plastic Housing

* This is dependant on probe selected, material, surface temperature, surface roughness and flatness.

PROBES

PROBES	FREQUENCY ( MHz ) & Crystal dia ( mm )	TEST RANGE ( IN STEEL )		ACCURACY	ALLOWABLE SURFACE TEMPERATURE	TYPICAL APPLICATION
PROBES	FREQUENCY ( MHz ) & Crystal dia ( mm )	FLAT SURFACE ( mm )	CYLINDRICAL SURFACE ( mm )	ACCURACY	ALLOWABLE SURFACE TEMPERATURE	TYPICAL APPLICATION
DT - 201	5 / 10	1 - 200	2 - 200mm with OD 45mm and more	ą 0.1mm upto 60mm; ą 0.5% above 60 mm	0 °C to 70 °C	General Purpose for flat surface and bigger dia.
DT - 212	10 / 5	1 - 25	2 - 25mm with OD 25mm and more	ą 0.1mm	0 °C to 70 °C	For law dia. tubes and thin objects
DT - 203	2 / 20	5 - 300	5 - 300mm with OD 100mm and more	ą 0.3mm upto 50mm; ą 1% above 50 mm	0 °C to 70 °C	For castings and other coarse grained material
DT - 201(H)	5 / 10	4 - 50	5 - 50mm with OD 100mm and more	ą 0.1mm	0 °C to 250 °C	For elevated surface temperature

E Back

Flaw Detectors | Thickness Gauges | Accessories & Attachment